Hey! If you want to fix the HP Monitor Input Signal Out of Range issue on a Windows computer, this article is best for you.
Many HP monitor users encounter the issue “input signal out of range hp monitor, input signal out of range monitor hp, input signal out of range change settings to 1280×1024 60hz, input signal out of range change settings to 1280×1024-60hz, input signal out of range change settings to 1366×768 60hz to fix this issue follow this article.
If you are getting above the error that indicates signal from your CPU is incompatible with the monitor’s settings. There are several root causes of the error some of the top reasons might be including incorrect resolution, cable issues, refresh rate, etc.
How to Fix input signal out of range monitor HP?
Table of Contents
To fix the above error follow the below steps one by one-
1. Check Connections Cable
This is the first step to fixing the error, you should ensure the connection that is connected on both the end monitor and CPU. Usually, a video cable is connected to a VGA or HDMI cable.
If your monitor is Securely connected to the CPU then once change the port another port is available on the CPU. Apart from this, you can also Inspect for damaged cable.
2. Adjust and Reset HP Monitor Settings
If you are getting an error HP Monitor Input Signal Out of Range then once you adjust your Monitor settings and reset Monitor settings To adjust and reset settings follow these easy steps-
To Adjust Monitor Settings–
STEP#1. Navigate to the HP front panel Physical Monitor buttons.
STEP#2. Navigate to Menu use the arrow key and click on Adjust Resolution.
STEP#3. Click on OK or enter to Save the changes.
To Reset HP Monitor Settings
STEP#1. Navigate to the HP front panel Physical Monitor buttons.
STEP#2. Navigate to Menu use the arrow key and find Reset or Factory Reset.
STEP#3. Select reset Options from the arrow key, Press yes, and OK to reset the settings.
STEP#4. Wait for reset it will likely display a message indicating the settings, Click on OK or enter to Save the changes.
3. Adjust Computer Resolution
To Adjust Computer resolution follow these easy steps-
STEP#1. Navigate to My Computer, Right-click on this PC, and select Properties.
STEP#2. Now, Click on Display from the left side panel.
STEP#3. Click on Display resolution and select “Recommended” resolution.
STEP#4. Click on apply and Ok.
4. Update Display Drivers
To Update the Display Driver follow these easy steps-
STEP#1. Navigate to run by Press (Windows +R) and type hdwwiz.cpl
STEP#2. Right Click, On Display Adaptors, and click on Update Driver.
STEP#3. Click on search automatically for updated driver software.
STEP#4. Download Driver from the Internet then Click on Close and Restart Your computer.
5. Test Your HP Monitor on Another CPU or Laptop
If you have another CPU or Laptop Once connect your Monitor to a different Dock and verify the issue. If your Monitor is working on another computer then there might be a problem is your CPU > you should contact an IT Professional to repair your computer.
If your Monitor is not working on another Computer then there might be a problem with HP Monitor. To fix the Internal damage issue contact HP customer care and align a technician to repair your Monitor.
Hopefully from the above steps your issue “HP Monitor Input Signal Out of Range’ has been resolved. If you have any questions please comment us.
Thanks For Reading, have a nice Day.
You may also read-
How to Fix”Input Signal Out Of Range” on Dell, HP, Lenovo?
How to Fix “Acer Monitor Input not Supported” on Windows 11/10
How to Fix Analog input cannot Display this Video Mode
How to Fix “The Current Input Timing is Not Supported by the monitor display” on Dell, HP, Lenovo?