7 Ways to Fix “The Network Path was not Found” Network error code 0x80070035 on Windows 11/10

In this article, We will know, How to Fix Network error code 0x80070035 “The network path was not found” on the Windows Operating system.

We know very well that Network sharing is too important for any office because it allows the user to share information with each other. You can easily create a network drive or share Drive over the network. if you want to know how to Create can follow these below easy steps-

• How to Share Folder and Drive on Windows 10
• How to Map a Network Drive in Windows 10

Some people notice that after Windows Update or many more cause that not able to access their share drive on the Network and getting an error such as “the network path was not found, Network code 0x80070035”,

While you try to Open your Network drive then get an error – WIndows cannot access check the spelling of the name otherwise, there might be a problem with your network. To try to identify and resolve network problems, click diagnose.

Condition-I

If you are getting an Error on one PC over the Network.

Solution:- If you are getting an error on one PC over the network then follow these easy steps to solve the error “the network path was not found“.-

• Check the Path of access Computer because many more peoples enter the wrong path than Verify your Path.
• Check connectivity between Host and Destination Computer. if Connectivity is not ok then maybe LAN card Issue, Configuration issue of IP address, Driver issue, Cable Issue, etc.
• Temporary Disable Antivirus Software and Firewall.

Condition-II

If you are getting the error “the network path was not found or Network error code 0x80070035” over Network and not able to access anyone.

if you are getting an error over the network or All the Computer then the following can route cause of the error-

• Check Basic steps of Hosts Computer, LAN cable, IP Configuration, DNS, etc.
• File Sharing Issue.
• Permission Issue.
• Firewall, Antivirus issue, etc.

Now we are going to fix the issue from a Different Point of view, You should follow the below steps that will be helpful for solving the issue.

How to Fix “the network path was not found” on Windows 10?

if you are getting issues such as on Windows 10, Windows 8, Windows 7. To solve an error follow these easy steps-

1. Verify the shared Folder or Drive

To verify Share Folder or Drive follow these easy steps-

1. Navigate to Run and type the IP address of the computer or computer name in the following formats-

\\192.168.0.105 and press Enter.

2. Now you can see the shared Folder that shared by you.

Note:- If getting any error then maybe sharing issue then follow steps that attached of above.

2. Turn on Network Discovery

For each and every sharing Folder or drive scenario your Network Discovery should be Turned on.

How to Turn on Network Discovery on Windows 10?

1. Navigate to Control Panel by pressing (Windows +R) and type Control.
2. Click on Network and Sharing Center.
3. From the Menu on the Left Panel side, Click on “Change Advanced Sharing Settings”.

4. Turn on Network Discovery and click on Apply changes.

5. Restart Your computer and check the issue.

3. Enable SMB 1.0/ CISF File Sharing Support

To enable CISF file Sharing Follow these easy steps-

1. Navigate to Control Panel and open Programs and Features.
2. From Menu of Left Panel. Click on “Turn Windows Features on or Off.
3. Now checks on SMB 1.0 Options and Click on OK.

4. Restart Computer and Check Now.

4. Disable IPv6

IPv6 can also create an Error such as “the network path was not found” then you should disable IPv6. To Disable IPv6 Follow these easy steps-

1. Press the Windows+R key.
2. Type NCPA.CPL and Enter. (Open Network Connections).
3. Right, Click on Network Adapter, and select Properties.
4. Uncheck from Internet Protocol version 6(TCP/IPv6).
5. Click on Ok and restart your computer.

5. Enable NetBIOS over TCP/IP

To enable NetBIOS over TCP/IP Follow these steps-

1. Press the Windows+R key.
2. Type NCPA.CPL and Enter. (Open Network Connections).
3. Right, Click on Network Adapter, and select Properties.
4. Click on Advanced.
5. Click on WINS Tab.
6. Select enable NetBIOS over TCP/IP.
7. Click on OK.

6. Update Windows to Latest Version

If you are getting the error “the network path was not found” then Windows Update is too useful to solve the issue. To Update Windows 10 up to date follow these steps-

1. Navigate to Start and click on Settings.
2. Click on Update and Security.
3. Click on Check for Update.
4. If any updates then should be updated.

7. Temporarily Disable Antivirus and Windows Firewall

If you are using third-party Antivirus such as Quick Heal, Kashyap Security, K7, Symantec, etc then you should disable Antivirus for Temporarily periods and Verify because sometimes happed Antivirus does not allow to Network Folder.

If you are using Microsoft Defender then Want to how to Disable Windows defender because Defender can also Create Problems.

How to disable windows defender in Windows 10

FAQ: Network error code 0x80070035 “The network path was not found”

1. How to Fix ‘Network Path Not Found’ Errors on Windows 10?

Ans. To Fix Network Path was Not Found follow the below steps-

• 1. Verify the shared Folder or Drive.
• 2. Turn on Network Discovery.
• 3. Enable SMB 1.0/ CISF File Sharing Support.
• 4. Disable IPv6.
• 5. Enable NetBIOS over TCP/IP.
• 6. Update Windows to Latest Version.
• 7. Temporarily Disable Antivirus and Windows Firewall.

2. How to Fix ‘error code 0x80070035‘ Errors on Windows 10?

Ans. Follow these easy steps-

• 1. Verify the share Folder or Drive.
• 2. Turn on Network Discovery.
• 3. Enable SMB 1.0/ CISF File Sharing Support.
• 4. Disable IPv6.
• 5. Enable NetBIOS over TCP/IP.
• 6. Update Windows to Latest Version.
• 7. Temporarily Disable Antivirus and Windows Firewall.

3. How do I Verify the number of share Folders on your Computer?

Ans. To verify Share Folder or Drive follow these easy steps-

1. Navigate to Run and type the IP address of the computer or computer name in the following formats-

\\192.168.0.105 and press Enter.

2. Now you can see the shared Folder that shared by you.

4. How do I Turn on Network Discovery on Windows 10?

Ans. To turn on Network Discovery should follow the below steps-

1. Navigate to Control Panel by pressing (Windows +R) and type Control.
2. Click on Network and Sharing Center.
3. From the Menu on the Left Panel side, Click on “Change Advanced Sharing Settings”.
4. Turn on Network Discovery and click on Apply changes.

Conclusion:

So, This is all about the Network error code 0x80070035 “The network path was not found”. Please comment on this article. if you have any doubts or queries please Comments to us.

We hope that you like this Article and helpful for the “Network error code 0x80070035 “The network path was not found” Issue. You can also Join Us on Social Media Pages Like Facebook and Twitter.

Thanks For Reading, Have A Nice Day.